Driver Install and Configuration


To link a Star Micronics receipt printer and cash drawer to CashFootprint. Use the following information:


Download driver direct from Star Micronics: http://www.starmicronics.com/support/


Plug in the printer and turn it on.


After installing the driver and Configuration utility, set the printer to use ESC/POS mode. Use the following guide:

https://www.starmicronics.com/help-center/knowledge-base/configure-tsp100-series-printers-esc-pos-mode/


CashFootprint Receipt Printer Setup

Once the above have been completed, go to CashFootprint > Tools menu > Options > Receipt Hardware tab > Receipt Printer tab > Click Add.  Enter a description for the printer (we typically use Receipts). Choose ESCPOS for the driver. Choose the Star receipt printer from the Printer dropdown.


Adjust and other settings that you desire.


Click Test Printer and you're printer setup is complete.


CashFootprint Cash Drawer Setup

To Setup the cash drawer connected to the back of your Star receipt printer, do the following: go to CashFootprint > Tools menu > Options > Receipt Hardware tab > Cash Drawer tab. Click Add. Enter a description (we use Main Drawer). Choose ESCPOS for the driver. Choose the Star receipt printer from the Printer dropdown.


Click Test Drawer and you're drawer setup is complete.